Repeaters

The Wayne Technical Fanatics operate three repeaters in Rittman and Akron along with 2 APRS Digipeaters and an APRS iGate. These repeaters are multi-mode digital and do not currently support analog FM.

Learn about these multi-mode digital repeaters here


KE8LDG

KD8LDG coverage map
KE8LDG Coverage Map (click to expand)

Frequency: 442.7375 MHz +5 Mhz
Location: Rittman, OH (Low Profile)
Status Dashboard: https://ke8ldg.ww8tf.club/
D-Star Settings:
UR: CQCQCQ
RPT1: KE8LDG_B
RPT2: KE8LDG_G
DMR Settings:
Brandmeister Network #310451
Color Code: CC1

Note: When entering the D-Star information, convert all underscores _ to spaces. The underscores are used for illustrative purposes only. For example, ‘KE8LDG _B’ would be typed “KE8LDG<SPACE>B”.


KE8LDH Coverage

KE8LDH

Frequency: 442.5125 MHz +5 Mhz
Location: Norton Ohio
PL/CTCSS: 110.9 Hz
Allstar Node: 50815


XRF330 Reflector

The club also runs the DSTAR XRF330 reflector as part of The Megalink Network Project. The reflector supports Modules A through Z. Module C is the default module for the WTF repeaters. Module A is the default for SARA and WARC repeaters. The reflector is available via DExtra as XRF330[A-Z] and DCS as DCS330[A-Z] (and XLX330[A-Z] for Pi-Star 4). The reflector is also available via DPLUS as REF330 for appropriately-configured Icom gateways. Use of the DCS protocol is strongly recommended.

In your radio, you’ll connect by:
UR: DCS330CL
RPT1: [your repeater/hotspot call and port]
RPT2: [your repeater/hotspot call and G]

for example fill in your own callsign and pad with spaces as needed to 8 characters:
UR: DCS330AL
RPT1: N8CD _ _ _ B
RPT2: N8CD _ _ _ G

Then once connected switch back to UR: CQCQCQ and you’ll be on the reflector.


Pictures of the Repeaters


Comments are closed.