KE8LDH 442.5125 News
KE8LDH 442.5125+ is back on the air for real! After previously bringing the repeater back online, the system has been hit with a series of misfortunes. But it’s back now!
Injecting CTCSS with PiTone
As faithful readers of the (very occasional) posts to this site, there is a series on modifying and using the Yaesu DR-1X repeaters. One of the latest hacks that’s been done to one is the use of a D2A board and PiTone to inject the needed CTCSS tone into the…
Megalink Service Terminations
WW8TF has decided to terminate some services in 2022 as part of a general clean-up of unused, inefficient, and underutilized services.
WW8TF/Rover Previous Runs
Check out this link for a listing of previous Ohio VHF+ Simplex Contest runs with the WW8TF/Rover: https://ww8tf.club/?s=rover
KE8LDH On the Air
KE8LDH 442.5125 MHz is back on the air. Currently it is setup as a (very) low profile machine in the Norton area. Due to failure of the MMVDM board and current lack of interest in buying a new one, the machine is back on the air as a standard analog…
KE8LDH Offline
442.5125 MHz KE8LDH in Akron is currently offline due to a radio failure. With access concerns and COVID, there is no ETA on a full replacement. KE8LDH will be temporarily setup at a low profile site in Norton.
More XLX330 Changes
Unfortunately, a few weeks after XLX330 Transcoding Stabilized the system starting having problems again. So back to the drawing board! Here’s info on the latest new system.
XLX330 Transcoding Stabilized
After a long, hard slog against what is obviously a first-world problem, the stability problems with the XLX330 reflector’s transcoding has been resolved. Back in June, we started having problems with XLX330 being stable. It was originally moved from his home at the repeater site due to heat. And since…
More Updates – Transcoding Reflector
Back in August,changes were made to XLX330. After four months of unreliable behavior all digital modes have been moved back to the integrated xlxd process.
Building an APRS IGate
Recently WW8TF-15 was upgraded and reconfigured to be a two-way APRS IGate. Here’s how to build an easy two-way APRS IGate with existing or easily obtainable parts.
